Sensors with IO-Link for temperature, pressure, and conductivity

Communication down to the lowest field level

Long plant downtimes now belong to the past. JUMO temperature, pressure, and conductivity sensors with IO-Link help you to better plan the availability or the exchange of sensors through the integrated diagnostic function. In addition, time-consuming parameterizations when changing sensors are eliminated as the necessary data is transferred from the superordinate system.

Your benefits in a nutshell

  • Optimization of the production process through communication down to the lowest field level
  • Reduction of mounting and startup times
  • Increase of plant efficiency due to maximum transparency down to the sensor level
  • Reduction of maintenance and service costs with simultaneous increase in plant availability
  • High degree of process reliability due to long operating life and great accuracy
  • Flexible use through compact design type and a variety of process connections
Communication process with IO-Link

Communication process with IO-Link

What is IO-Link?

IO-Link is simply flexible – optimization of the production process through communication down to the lowest field level

Flexibility, production process optimization, and remote serviceability are important performance parameters for machines or plants. Sensors with IO-Link now give the plant operator access to the lowest field level. Only minimal effort is required to retrieve sensor information, parameterization, and diagnoses so that plant conditions can be ideally evaluated. The efficient point-to-point communication of IO-Link is based on the well-known three-wire sensor connection that does not place additional demands on the cable material. IO-Link is consequently not a fieldbus, but the further development of the previous and proven connection technology for sensors. IO-Link is a serial, bidirectional point-to-point connection for signal transmission and energy supply within any number of networks, fieldbuses, or back panel buses.

This is why you should switch to sensors with IO-Link
Reduction of commissioning times Reduction of commissioning times
Increase in plant efficiency Increase in plant efficiency
Reduces costs Reduces costs
IO-Link-Device-Tool

IO-Link-Device-Tool

Sensors with IO-Link are fast and uncomplicated

Reduction of mounting and startup times

The use of sensors with IO-Link can significantly reduce the required effort for mounting and startup. This advantage is made possible through simplified cabling as well as automation of the startup through parameter storage and duplication. During mounting, ready-to-install cables are used so that no assembly is required and error sources are omitted. Startup is also possible through automation as the parameters can be downloaded and made available to the device in a matter of seconds. Users particularly appreciate IO-Link due to its simple installation and parameterization as well as its independence from the fieldbus. The result is that the need for wiring is significantly decreased and that each sensor always has its own "ID card" due to consistent parameter data retention. This greatly reduces the amount of work involved in troubleshooting.

Sensors with IO-Link are simply efficient

Increase of plant efficiency due to maximum transparency down to the sensor level

Times of unexpected plant failures due to a sensor defect are over. The reason here is that the integrated diagnostic mechanisms allow early recognition and repair of defective sensor states. The functions contained in the sensors – such as operating hours counter, drag indicator, and detection of probe breaks/short-circuits – help to evaluate the sensor states early enough to react so that plant efficiency increases considerably. IO-Link offers the option of exchanging cyclical as well as acyclic data with superordinate levels. For example, parameter data can be downloaded to a sensor or, alternatively, diagnostic data can be extracted during operation. Due to a transmission speed COM 3 with 230.4 kBaud and the cycle time of 2 ms data is quickly exchanged and available within seconds.

Diagnosis overview

Diagnosis overview

Example IODD

Example IODD

Sensors with IO-Link keep costs under control

Cost reduction while plant availability increases at the same time

IO-Link closes the communication gap between the field level and the sensor level. As a result, other than the process variables, data for identification, for parameterization, and about the condition of the device can be transferred. Now information is available that prevents the mix-up with wrong device types during device exchange. The parameterization of the sensors is saved in a superimposed fashion so that it can be automatically transferred during device exchange. Each IO-Link devices includes a device ID. The IO-Link master retrieves the device ID and can assign the device to an IODD. This offers the option to distinguish the sensor type (temperature sensor/pressure sensor) from other ones through the device ID as each sensor type possesses several device IDs. These clearly identify the sensor and describe its different features. One result is that the exchange of a sensor with another that deviates in the measuring range and accuracy class can be identified immediately. The wrongly mounted sensor is instantly replaced by the correct one and is not even implemented, which prevents its destruction or an error during running operation of the plant.

JUMO dTRANS T09 cable transmitter for temperature

The JUMO dTRANS T09 cable transmitter for retrofitting or digitizing systems

Retrofit IO-Link easily

JUMO dTRANS T09 cable transmitter for temperature

With the cable transmitter with IO-Link (also available with analog output), you can easily digitize your RTD temperature probes in the cable. With M12 connections on both sides, the JUMO dTRANS T09 is uncomplicated and cost-saving to install. The vibration- and shock-resistant transmitter in a stainless steel housing is suitable for PT100 or Pt1000 with four-wire connection.

Make an appointment

Dies ist ein Pflichtfeld.
This is a mandatory field. Please enter a first name.
This is a mandatory field. Please enter a surname.
This is a mandatory field. Please enter your company name.
Please select an option
This is a mandatory field. Please enter a street.
This is a mandatory field. Please enter a postal code.
This is a mandatory field. Please enter a city.
Please select an option
This is a mandatory field. Please enter your email address.

With your inquiry you set us a task which we would like to fulfil to your satisfaction. The data collected in this context is stored. In order to process your request satisfactorily it is necessary to fill in all available fields (only fields marked with * are mandatory) We use your data to process your request as part of the business process. Personal data will not be treated. In particular, we do not pass on any data to third parties. We reserve the right to statistically evaluate anonymous data records.

Contact

Technical sale

Sensors

Phone:

+49 661 6003-724 Get in contact with us!