Thyristor power switches are required for contactless switching of the alternating current loads. A typical application is the switching of ohmic-inductive loads at a high switching frequency, particularly in the industrial sector.
| general technical data | |
|---|---|
| Peak blocking voltage | ≥ 650 Vp; ≥ 1400 Vp |
| Weight | 60 g |
| Ambient temperature | -20 to +70 °C |
| Galvanic isolation | Between the control and power section through optocouplers; insulation voltage 4 kV |
| Load type | 1-phase |
| Special features | Overvoltage protection by integrated varistor, LED display for control input |
| Electrical connection | Screw terminals |
| Load current (max.) | 50 A |
| Operating mode | Zero-voltage switching |
| Load current (min.) | 150 mA AC; 250 mA AC |
| Approvals | cULus/CSA |
| Protection type | IP20 |
| Dimensions | 45 × 58.2 × 29 mm |
| Load voltage | 24 to 265 V AC; 42 to 660 V AC |
| Control voltage | 3 to 32 V DC; 4 to 32 V DC |
557.53 KB, English
446.74 KB, English
7/15/2024
We will assist you with your project and provide you with an offer tailored to your personal needs.
Team Sales
We care about your problems and will find solutions for you. We are also the contact persons for startup, repair, maintenance and calibration.
Team Service
