Pressure

Pressure measurement is one of the most important tasks in almost all industrial sectors. Here, high-quality pressure measuring devices by JUMO ensure reliable and safe measurement results. They also offer the right solution for every application: hygienic products for the food and pharmaceutical industry as well as universal products for mechanical and plant engineering – always with a high degree of precision.

  • Product selection guide

Pressure

Filter
1
Hits: 67
JUMO MIDAS S05 - OEM pressure transmitter for universal applications
H2 Signet

JUMO MIDAS S05

OEM pressure transmitter for universal applications Basic type: 401010
This pressure transmitter acquires the relative and absolute pressure. The measuring system is fully welded and can be used for all media. The silicon sensor is resistant to overloading even in the lowest measuring ranges. It is mainly used in mechanical and plant engineering and is also suitable for hydrogen applications in electrolyzers, synthesis plants, and mobile fuel cells.
  • Measuring range: 0 to 100 bar relative, 0 to 40 bar absolute
  • Compact design type
  • Piezoresistive silicon sensor
JUMO dTRANS p20 DELTA Ex d - Differential pressure transmitter with flameproof enclosure

JUMO dTRANS p20 DELTA Ex d

Differential pressure transmitter with flameproof enclosure Basic type: 403023
The product measures the differential pressure of gases, steam, and liquids. The version [Ex d] (flameproof enclosure) can be mounted up to zone 0. The transmitter can be programmed and customized as required. The transmitter with flameproof enclosure is used in such places as power plants.
  • 1 mbar to 100 bar DP
  • Explosion protection [Ex d]
  • Linearity: 0.07 %
JUMO dTRANS p35 - Pressure sensor with IO-Link
H2 Signet

JUMO dTRANS p35

Pressure sensor with IO-Link Basic type: 402058
The pressure sensor measures relative and absolute pressure in liquids and gases. The device is equipped with an IO-Link interface according to specification 1.1. As a result, the pressure sensor is suitable for use in plant and mechanical engineering for connecting to automation systems.
  • Measuring range from 400 mbar to 600 bar relative
  • Medium temperatures -40 to +125 °C
  • IO-Link interface
JUMO DELOS SI - Precision pressure transmitter with switching contact and display

JUMO DELOS SI

Precision pressure transmitter with switching contact and display Basic type: 405052
The product is designed according to hygienic requirements and offers a high degree of process reliability. The nominal values set by default are between 400 mbar and 60 bar. The transmitter is used in such places as dairies and breweries.
  • Measuring range: 0 to 60 bar relative/absolute
  • Accuracy as of 0.1 % from end value
  • Measuring range scaling 1:4
JUMO CEROS S01 M - Digital pressure measuring cell
H2 Signet

JUMO CEROS S01 M

Digital pressure measuring cell Basic type: 405101
The pressure measuring cell provides a temperature compensated and calibrated digital/analog output signal. The piezoresistive sensing element with integrated signal processing is hermetically encapsulated. It ensures stable, precise linearity and accuracy values even under adverse conditions.
  • Measuring range from 100 mbar to 100 bar
  • for installation in one's own devices
  • Individual connection possibilities
JUMO dTRANS p20 DELTA - Differential pressure transmitter

JUMO dTRANS p20 DELTA

Differential pressure transmitter Basic type: 403022
The product measures the differential pressure of gases, steam, and liquids. The version [Ex ia] can be mounted up to zone 0. The transmitter can be programmed and customized as required. One application is in the chemical and petrochemical industry.
  • Linearity: 0.07 %
  • Turn down: 1:200
  • HART® interface
JUMO DICON touch - Two-Channel/Four-Channel Process and Program Controller

JUMO DICON touch

Two-Channel/Four-Channel Process and Program Controller Basic type: 703571
DICON touch can be used to perform complex control and management tasks. The plant can be visualized and operated via freely-definable process screens. The device has a modular design and can therefore be adapted to the individual plant.
  • Cascade control
  • Modbus master TCP/RTU
  • Up to 4 analog inputs
Pressure and differential pressure transmitter - For non-aggressive gases

Pressure and differential pressure transmitter

For non-aggressive gases Basic type: 404304
The type 4304 product acquires the negative pressure, overpressure, or differential pressure of non-aggressive gases. Upon request, the device can be equipped with an LCD display. The transmitter is mainly used in heating engineering, air-conditioning, and ventilation technology.
  • 0.50 to 1200 mbar DP, relative
  • Temperature -10 to +50 °C
  • Characteristic line: linear/root extracted
JUMO diraTRON - Compact controller

JUMO diraTRON

Compact controller Basic type: 702110
Universally-applicable devices in 5 DIN formats for controlling process variables. The basic type includes autotuning, a ramp function, a program controller, manual mode, limit value monitoring functions, digital control signals, extensive timer functions, and a service counter.
  • 1 control channel
  • Display of individual texts
  • Service counter
JUMO MIDAS S06 - OEM pressure transmitter for low pressure applications
H2 Signet

JUMO MIDAS S06

OEM pressure transmitter for low pressure applications Basic type: 401011
This pressure transmitter is completely welded and designed for use in harsh conditions. It can also be used for level measurement. The applied silicon sensor is extremely resilient.
  • Measuring range: 0 to 400 mbar relative
  • Compact design type
  • DIN EN 61373 category 1B + DIN EN 50155
JUMO TAROS S47 P - Precision pressure transmitter
H2 Signet

JUMO TAROS S47 P

Precision pressure transmitter Basic type: 402072
The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers high process reliability through maximum accuracy as well as over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. or 0.6 and 40 bar abs. The precision transmitter is used, among other things, in mechanical and plant engineering.
  • 0.1 to 100 bar rel; 0.6 to 40 bar abs
  • Temperature: -40 to + 125 °C
  • Protection type IP65 to IP69
JUMO TAROS S46 H - Hygienic pressure transmitter
H2 Signet

JUMO TAROS S46 H

Hygienic pressure transmitter Basic type: 402071
The device is designed according to the hygienic requirements for precision measurement and a long lifecycle. It offers process reliability through a high degree of accuracy, even over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. pressure or between 0.25 and 40 bar abs. pressure. The transmitter is used is the food and pharmaceutical industry.
  • 0.1 to 100 bar rel; 0.25 to 40 bar abs
  • Temperature: -40 to + 125 °C
  • FDA compliant materials
JUMO diraVIEW 104/108/116/132 - Digital indicator

JUMO diraVIEW 104/108/116/132

Digital indicator Basic type: 701510
Devices that can be used universally in various DIN formats to display process variables. The basic version includes a min/max value function, a hold function, a taring function, limit value monitoring functions, digital control signals, timer functions, and a service counter.
  • 1 universal analog input
  • Galvanic isolation 3000 V
  • 5 DIN formats (size)
JUMO miroVIEW - Smart digital indicator with limit value 
monitoring function for panel mounting

JUMO miroVIEW

Smart digital indicator with limit value monitoring function for panel mounting Basic type: 701580
The JUMO miroVIEW is a digital indicator with measurement inputs for RTD temperature probes or thermocouples and standard signals for panel mounting.
  • Different measurement inputs selectable
  • Installation format 76 × 36 mm
  • Quick configuration via USB
JUMO miroVIEW - Smart digital indicator with limit value monitoring function for panel mounting

JUMO miroVIEW

Smart digital indicator with limit value monitoring function for panel mounting Basic type: 701590
The JUMO miroVIEW is a digital indicator with measurement input for RTD temperature probes for panel mounting. In the 60 mm and 80 mm round installation format, the JUMO miroVIEW offers an alternative solution for mechanical dial thermometers or contact dial thermometers.
  • Measuring inputs for RTD temperature probes
  • Round installation formats
  • Quick configuration via USB
JUMO multirange and differential pressure transmitter - For non-aggressive gases

JUMO multirange and differential pressure transmitter

For non-aggressive gases Basic type: 402006
The product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms.
  • Measuring range: 2.5 hPa to 100 hPa DP
  • Zero point adjustment possible
  • 0(2) to 10 V or 0(4) to 20 mA
JUMO SIRAS P21 DP - Process pressure transmitter with SIL/PL

JUMO SIRAS P21 DP

Process pressure transmitter with SIL/PL Basic type: 403024
The pressure transmitter reliably and accurately measures differential pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.
  • Up to 100 bar
  • Linearity: 0.05 %
  • Safety Integrity Level (SIL 2/SIL 3), PL c/PL d
JUMO MIDAS S22 Ex - Miniature pressure transmitter for Ex areas

JUMO MIDAS S22 Ex

Miniature pressure transmitter for Ex areas Basic type: 404720
The miniature pressure transmitter measures the relative and absolute pressure of gases, steam, and liquids based on the piezoresistive measuring principle. It is completely welded and is particularly suitable for use in explosion-proof areas. Including oil, fuel, or gas plants.
  • 2.5 to 100 bar relative and absolute
  • Medium temperature: -20 to +85 °C
  • Accuracy: as of 0.3 % MSP
JUMO MIDAS C12 CA - Pressure transmitter − Compressed Air

JUMO MIDAS C12 CA

Pressure transmitter − Compressed Air Basic type: 401014
The JUMO MIDAS C12 CA is designed as a pressure transmitter especially for requirements in the field of compressor pressure measurement. The ceramic sensor detects relative pressures which provides a reliable and long-term stable signal.
  • long-term stability
  • precision
  • optimized cost
JUMO CEROS C02 M - Digital low-energy pressure measuring cell

JUMO CEROS C02 M

Digital low-energy pressure measuring cell Basic type: 405106
You can rely on the digital pressure measuring cell for relative pressure due to high degree of measuring accuracy and long-term stability. In addition, it is characterized by low energy requirements and can therefore be operated with battery voltage. The active module is ready for immediate use and saves expensive calibration systems due to prior calibration and temperature compensation by JUMO.
  • 0.1 to 60 bar relative
  • Low energy requirements
  • Material: ceramic
JUMO meroTRON - Modular one-channel/two-channel controller with PLC function

JUMO meroTRON

Modular one-channel/two-channel controller with PLC function Basic type: 703051
The multifunctional controller impresses with the individual design of its user interface and hardware equipment. This way, analog as well as digital inputs and outputs, counting inputs, and interfaces can be added as required. The controller masters even complex applications with a second control channel, math and logic functions, and the implementation of control functions via ST code.
  • Program controller with real-time start
  • Modbus master (RTU/TCP)
  • Data logger
JUMO meroVIEW - Multifunction digital indicator with PLC function

JUMO meroVIEW

Multifunction digital indicator with PLC function Basic type: 701551
The multifunctional digital controller impresses with the individual design of its user interface and hardware equipment. Analog and digital inputs and outputs, counting inputs, as well as interfaces can be flexibly added to display the required process variables. The indicator masters even complex applications with math and logic functions as well as the implementation of control functions via ST code.
  • Up to 5 universal analog inputs
  • Scalable structure using plug-in cards
  • 4 DIN formats (size)
JUMO miroTRON - Electronic thermostat with optional PID two-state controller function

JUMO miroTRON

Electronic thermostat with optional PID two-state controller function Basic type: 701080
The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement inputs for RTD temperature probes or thermocouples and standard signals.
  • Service and operating hours counter
  • Process information via message texts
  • Quick configuration via USB
JUMO SIRAS P21 AR - Process pressure transmitter with SIL/PL
H2 Signet

JUMO SIRAS P21 AR

Process pressure transmitter with SIL/PL Basic type: 403028
The pressure transmitter reliably and accurately measures relative and absolute pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.
  • Up to 100 bar
  • Linearity: 0.05 %
  • Safety Integrity Level (SIL 2/SIL 3), PL c/PL d
JUMO CANtrans p ceramic - Pressure transmitter with CANopen output

JUMO CANtrans p ceramic

Pressure transmitter with CANopen output Basic type: 402055
The product acquires either the relative or absolute pressure of liquid and gaseous media. It digitizes the pressure value and makes it available for further use through the "CANopen" serial bus protocol. The pressure transmitter is used in such environments as wind power plants.
  • Protection type: IP67
  • 1.6 bar to 100 bar relative pressure
  • -20 to +85 °C
JUMO CANtrans p - Pressure transmitter with CANopen output

JUMO CANtrans p

Pressure transmitter with CANopen output Basic type: 402056
The product acquires either the relative or absolute pressure of liquid and gaseous media. It digitizes the pressure value and makes it available for further use through the "CANopen" serial bus protocol. The pressure transmitter is used in such environments as wind power plants.
  • Protection type IP67
  • -40 to +125 °C
  • 600 bar relative to 25 bar absolute
JUMO differential pressure monitor - For air, smoke, and exhaust gases

JUMO differential pressure monitor

For air, smoke, and exhaust gases Basic type: 404201
The type 4 ADS product acquires the negative pressure, overpressure, or differential pressure of air, smoke, and exhaust gases in ventilation, air-conditioning, and filter systems. It is suitable to switch a current circuit ON, OFF or change it over, when the actual value changes in relation to the setpoint value.
  • Temperature -15 to +70 °C
  • Parts made out of polycarbonate
  • Measuring ranges: from 0.4 mbar
Diaphragm seal - With screw-in thread DIN ISO 228/1 or ANSI B 1.201

Diaphragm seal

With screw-in thread DIN ISO 228/1 or ANSI B 1.201 Basic type: 409782
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: screw-in thread
  • Nominal widths: 1" NPT, 1.5" NPT, 2" NPT
  • Nominal pressure: max. PN 600
Diaphragm seal - With flange connection according to ANSI B 16.5

Diaphragm seal

With flange connection according to ANSI B 16.5 Basic type: 409786
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media. This product has been designed according to ANSI B 16.5 and is available with a sealing strip type RF.
  • Process connection: flange according to ANSI B16.5
  • Nominal widths: DN 2", DN 3", DN 4"
  • Nominal pressure: PN 150 to PN 2500
Diaphragm seal - With membrane 4MDV-10

Diaphragm seal

With membrane 4MDV-10 Basic type: 409780
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: flange DIN EN 1092-1
  • Nominal widths: DN 15, DN 20, DN 25, DN 50
  • Nominal pressure PN 40, PN 100, PN 250
Diaphragm seal - With ISS/SMS/RJT socket and union nut

Diaphragm seal

With ISS/SMS/RJT socket and union nut Basic type: 409778
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: ISS, SMS, RJT socket
  • Nominal widths: DN 1", DN 1.5", DN 2"
  • Nominal pressure: max. PN 40
Diaphragm seal - With DRD flange or VARIVENT® socket

Diaphragm seal

With DRD flange or VARIVENT® socket Basic type: 409776
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: DRD flange; VARIVENT®
  • Diameter: max. 68 mm
  • Nominal pressure: max. PN 40
Diaphragm seal - With clamp connection

Diaphragm seal

With clamp connection Basic type: 409774
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: clamp
  • Nominal widths: DN 1.5" or DN 2"
  • Nominal pressure: max. PN 40
Diaphragm seal - With dairy pipe fitting DIN 11851

Diaphragm seal

With dairy pipe fitting DIN 11851 Basic type: 409772
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media.
  • Process connection: dairy pipe fitting
  • Nominal widths: DN 25, DN 32, DN 40, DN 50
  • Nominal pressure: max. PN 40
Pressure measuring cells - For OEM applications

Pressure measuring cells

For OEM applications Basic type: 404410
The product records relative and absolute pressure between 0 to 350 mbar and 0 to 100 bar. The measuring principle is based on piezoresistive measurement technology with a silicon semiconductor thin-film strain gauge here. The measuring cells can be used within the entire OEM range.
  • Silicon semiconductor thin-film strain gauge
  • Very good price-performance ratio
  • Material: stainless steel
Pressure transmitter - With analog actual value display

Pressure transmitter

With analog actual value display Basic type: 404312
The product acquires measuring ranges from -1 to +400 bar. It is mainly used in the chemical and process engineering industry as a combination between an on-site analog display with an analog standard output signal for remote transmission.
  • Measuring range: -1 to +400 bar
  • Protection type IP54
  • Deviation from characteristic line ≤ 0.5 %
JUMO Device App - Mobile access to JUMO devices

JUMO Device App

Mobile access to JUMO devices Basic type: 709771
The JUMO Device App provides the user with mobile access to their process data at all times. All current process values as well as the alarm and event list from selected JUMO devices which are networked via Ethernet can be viewed in text form.
  • IP address/DNS name
  • Retrieval of event/alarm lists
  • Scan function for device search
Diaphragm seal with flange connection - DIN EN 1092-1 with sealing strip type B1

Diaphragm seal with flange connection

DIN EN 1092-1 with sealing strip type B1 Basic type: 409784
Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media. This product has been designed according to DIN EN 1092-1 and is available with a sealing strip type B1.
  • Accessories: stainless steel flushing ring (1.4571)
  • Nominal pressure: PN 16 to PN 400
  • Process connection: DN 25, DN 50, DN 80, DN 100
JUMO MIDAS DP10 - Differential pressure transmitter

JUMO MIDAS DP10

Differential pressure transmitter Basic type: 401050
The product acquires the differential pressure in liquid as well as gaseous media and transforms it into an analog output signal. The transmitter is mainly used for filter monitoring.
  • 400 mbar to 16 bar
  • DIN EN 61373 category 1B + DIN EN 50155
  • Compact design type
JUMO dTRANS p32 - Pressure transmitter

JUMO dTRANS p32

Pressure transmitter Basic type: 402051
The product acquires the relative pressure in dry, non-corrosive, and non-ionizing media and transforms it into an electrical signal. The basis is the piezoresistive measuring principle. The pressure transmitter is mainly used in lab technology and cleanroom technology.
  • 0 to 1.6 bar relative pressure
  • Protection type: IP65/IP67
  • Sensitive pressure recording
JUMO DELOS HP - Precision pressure transmitter with switching contacts and display

JUMO DELOS HP

Precision pressure transmitter with switching contacts and display Basic type: 405054
The product is equipped with an electronic pressure switch with analog output and is specially designed for use on test benches, in laboratory areas, and for special machine construction. The default nominal values are between 160 and 600 bar.
  • Measuring range: 0 to 600 bar relative
  • Accuracy as of 0.15 % from end value
  • Measuring range scaling 1:4
Pressure transmitter - For small measuring ranges

Pressure transmitter

For small measuring ranges Basic type: 404327
The product acquires the pressure of liquid and gaseous media with the help of a capacitive ceramic sensor. The value is then converted into an electrical signal. The transmitter is used in such fields as medical technology.
  • 50 mbar to 1 bar relative pressure
  • Linearity: ≤ 0.2 % of end value
  • Protection type: IP67
JUMO dTRANS p20 Ex d - Process pressure transmitter with a flameproof enclosure

JUMO dTRANS p20 Ex d

Process pressure transmitter with a flameproof enclosure Basic type: 403026
The product measures the relative and absolute pressure of gases, steam, and liquids and can be mounted up to zone 0. Front-flush process connections are available to meet hygiene requirements. The transmitter is used in such places as power plants.
  • -1 to +600 bar relative, 0 to 100 bar absolute
  • Linearity: 0.05 %
  • Deviation of 0.05 %
JUMO MIDAS DR - Pressure transmitter for control cabinet mounting

JUMO MIDAS DR

Pressure transmitter for control cabinet mounting Basic type: 401009
This pressure transmitter is the plant control cabinet variant of the basic JUMO MIDAS product. It acquires the relative pressure of liquid as well as gaseous media and transforms it into an electrical signal.
  • Measuring range: 0 to 16 bar relative
  • Elastomer seal
  • Compact design type
JUMO MIDAS C18 SW - OEM pressure transmitter for seawater applications

JUMO MIDAS C18 SW

OEM pressure transmitter for seawater applications Basic type: 401012
This pressure transmitter features a hysteresis-free ceramic measuring cell and a titanium case. This protects it against organic acids and solutions containing chloride. It is used in particular in ship building and laboratory engineering.
  • Measuring range: -1 to +100 bar relative
  • Vibration resistance
  • Elastomer seal
JUMO dTRANS p31 - Pressure transmitter for increased medium temperatures

JUMO dTRANS p31

Pressure transmitter for increased medium temperatures Basic type: 402050
The product acquires either the relative or absolute pressure of liquid and gaseous media and transforms it into an electrical signal. The transmitter is made entirely of stainless steel and has a hygienic design. It is mainly used in the food and pharmaceutical industry.
  • Protection type: IP65/IP67
  • 60 bar relative to 25 bar absolute
  • Linearity: ≤ 0.2 % MSP
JUMO Quantrol - Compact controller

JUMO Quantrol

Compact controller Basic type: 702030
The Quantrol series is available in three DIN formats. It is used for two-state and three-state control applications as well as for the control of regulating valves or thyristor power controllers via a continuous output. Configuration is carried out on the device front or using the setup program.
  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • RS485 interface (Modbus-RTU)
  • Two-state/three-state/continuous controller
JUMO dTRANS p33 - Pressure transmitter and level probe for Ex areas

JUMO dTRANS p33

Pressure transmitter and level probe for Ex areas Basic type: 404753
The product measures the pressure of non-aggressive and aggressive gases, steam, liquids, and dusts on the basis of the piezoresistive measuring principle. It was designed and certified according to ATEX directives. The transmitter is used, among other places, in flour and grain silos.
  • Admissible medium temperature: -40 to +200 °C
  • Up to 600 bar relative and 25 bar absolute
  • 0.5 % MSP (linearity)
JUMO Wtrans p - Pressure transmitter with wireless data transmission

JUMO Wtrans p

Pressure transmitter with wireless data transmission Basic type: 402060
The product acquires the pressure of liquid or gaseous media in combination with a Wtrans receiver. The measured values on the receiver are provided in a digital format and as an electrical signal. The product is used in instances where laying a cable would be too demanding.
  • 600 bar relative to 25 bar absolute
  • Range up to 300 m
  • Radio frequency: 868.4 MHz
JUMO Wtrans receiver - Universal receiver for JUMO wireless measuring probes

JUMO Wtrans receiver

Universal receiver for JUMO wireless measuring probes Basic type: 902931
The Wtrans receiver T01, in combination with suitable Wtrans transmitters, is used for the mobile or stationary measurement of the following physical measurands: temperature, pressure, and humidity. The wireless sensor technology also works in a harsh industrial environment.
  • Signals (0(4) to 20 mA, 0 to 10 V)
  • RS485 interface
  • Open air range 300 m

item items, maximum number of items reached