Buy PID controllers

Digital controllers from JUMO are equipped with an autotuning function, so that in addition to precise control, simple parameterization and operation are also possible. Furthermore, our PID controllers can be used flexibly and can be configured according to outputs and inputs, interfaces, and approvals. We are available to advise you on the selection of the appropriate PID controllers and are also there for you after startup with a technical hotline. Buy PID controllers now or request a quote!

  • Product selection guide

PID controllers

Filter
1
Hits: 15
Topseller
JUMO DICON touch - Two-Channel/Four-Channel Process and Program Controller

JUMO DICON touch
Two-Channel/Four-Channel Process and Program Controller Basic type: 703571
DICON touch can be used to perform complex control and management tasks. The plant can be visualized and operated via freely-definable process screens. The device has a modular design and can therefore be adapted to the individual plant.
  • Cascade control
  • Modbus master TCP/RTU
  • Up to 4 analog inputs
Discontinued model
JUMO dTRON 304/308/316 - Compact controller with program function

JUMO dTRON 304/308/316
Compact controller with program function Basic type: 703041
The controller series comprises 4 user programmable devices in various DIN formats to control temperatures, pressures, and other process variables.
  • 4 limit value monitoring functions
  • Inputs/outputs can be expanded
  • Formats: 48 × 48 – 96 × 96 mm
Topseller
JUMO diraTRON - Compact controller

JUMO diraTRON
Compact controller Basic type: 702110
Universally-applicable devices in 5 DIN formats for controlling process variables. The basic type includes autotuning, a ramp function, a program controller, manual mode, limit value monitoring functions, digital control signals, extensive timer functions, and a service counter.
  • 1 control channel
  • Display of individual texts
  • Service counter
Topseller
JUMO eTRON T100 - Electronic thermostat with optional PID two-state controller function

JUMO eTRON T100
Electronic thermostat with optional PID two-state controller function Basic type: 701052
The electronic thermostat for DIN rail mounting has been especially developed for temperature control and monitoring. RTD temperature probes, thermocouples, current signals, and special temperature probes that are used in railroad technology can be connected to the measurement input. The intuitively operated device is optionally available as a PID two-state controller.
  • Relay (changeover contact 10 A), PhotoMOS® relay
  • Pt100, Pt1000, KTY2X-6
  • Thermocouple type J, L, and K
New product
JUMO miroTRON - Electronic thermostat with optional PID two-state controller function

JUMO miroTRON
Electronic thermostat with optional PID two-state controller function Basic type: 701080
The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement inputs for RTD temperature probes or thermocouples and standard signals.
  • Service and operating hours counter
  • Process information via message texts
  • Quick configuration via USB
New product
JUMO miroTRON - Electronic thermostat with optional PID two-state controller function

JUMO miroTRON
Electronic thermostat with optional PID two-state controller function Basic type: 701090
The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement input for RTD temperature probes. In the 60 mm and 80 mm round installation format, the JUMO miroTRON offers an alternative solution for mechanical dial thermometers or contact dial thermometers.
  • Service and operating hours counter
  • Process information via message texts
  • Quick configuration via USB
New product
JUMO meroTRON - Modular one-channel/two-channel controller with PLC function

JUMO meroTRON
Modular one-channel/two-channel controller with PLC function Basic type: 703051
The multifunctional controller impresses with the individual design of its user interface and hardware equipment. This way, analog as well as digital inputs and outputs, counting inputs, and interfaces can be added as required. The controller masters even complex applications with a second control channel, math and logic functions, and the implementation of control functions via ST code.
  • Program controller with real-time start
  • Modbus master (RTU/TCP)
  • Data logger
JUMO eTRON M100 - Electronic cooling controller

JUMO eTRON M100
Electronic cooling controller Basic type: 701061
The JUMO eTRON M100 is an electronic cooling controller for use in cold-storage rooms, display refrigerators, or refrigerating counters to be connected to RTD temperature probes. The first measurement input acquires the temperature of the cold-storage room. The second measurement input acquires the temperature of the vaporizer.
  • Pt100 two-wire, Pt1000 two-wire, KTY2X-6
  • DIN EN 12830 and DIN EN 13485
  • HACCP-compliant recording
JUMO eTRON M100 - Electronic 2-channel microstat

JUMO eTRON M100
Electronic 2-channel microstat Basic type: 701066
The product is an electronic 2-channel microstat for universal use to be connected to RTD temperature probes. The 2 measurement inputs acquire temperatures that are available as the actual value and that can be assigned to the relays as the user sees fit.
  • RS485 interface
  • Pt100, Pt1000, KTY1X-6/KTY2X-6
  • DIN EN 12830 and DIN EN 13485
JUMO exTHERM-DR - Two-state controller with [Ex ia] input according to ATEX

JUMO exTHERM-DR
Two-state controller with [Ex ia] input according to ATEX Basic type: 701055
The JUMO exTHERM-DR is a two-state controller for heating or cooling applications. The intrinsically safe [Ex ia] measurement input allows the direct connection of the corresponding type-tested probes. Use of a barrier is no longer required.
  • IECEx, ATEX
  • Controller output (relay)
  • Limit value output for alarm indication
JUMO Quantrol - Compact controller

JUMO Quantrol
Compact controller Basic type: 702030
The Quantrol series is available in three DIN formats. It is used for two-state and three-state control applications as well as for the control of regulating valves or thyristor power controllers via a continuous output. Configuration is carried out on the device front or using the setup program.
  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • RS485 interface (Modbus-RTU)
  • Two-state/three-state/continuous controller
JUMO iTRON DR 100 - Compact controller

JUMO iTRON DR 100
Compact controller Basic type: 702060
The JUMO iTRON DR 100 is a universal, user programmable microprocessor controller suitable for a large number of technical control applications. As an option, the controller is available with 1 relay (changeover contact) or 2 relays (normally open contacts).
  • Mounting on DIN rail, 35 mm
  • Two-state/three-state controller
  • Design width 22.5 mm
Discontinued model
JUMO IMAGO F3000 - Process control for the meat processing industry

JUMO IMAGO F3000
Process control for the meat processing industry Basic type: 700101
The modular process control is suitable for controlling and regulating cooking, smoking, and air-conditioning systems as well as all associated devices such as smoke generators, catalysts, etc. It is available in portrait and landscape format.
  • 4 control channels
  • 5" color screen
  • 315 × 171/171 × 315 mm formats
Discontinued model
JUMO IMAGO 500 - Multichannel process and program controller

JUMO IMAGO 500
Multichannel process and program controller Basic type: 703590
The JUMO IMAGO 500 is a process and program controller with up to 8 controller channels or 4 program channels. The user interface masks can be adapted according to individual preferences. 2 screen masks allow user-specific placement of text, process values, background images, and icons
  • Up to 8 control channels and 4 program channels
  • Up to 4 cascade controllers
  • 50 programs with 100 sections
Discontinued model
JUMO dTRON 304/308/316 plast - Compact controller for the plastics industry

JUMO dTRON 304/308/316 plast
Compact controller for the plastics industry Basic type: 703046
The JUMO dTRON 3xx plast controller series consists of 3 user programmable devices to control temperatures and other process variables for special applications in the plastics industry. Application areas include extruders, injection molding machines, tempering equipment, and hot channel systems.
  • Formats: 48 × 48 mm, 48 × 96 mm, 96 × 96 mm
  • PROFIBUS DP interface
  • Modbus master/slave interface

item items, maximum number of items reached

Technical features at a glance

  • Retrofitting due to modular hardware concept
  • Suitable control parameters for autotuning
  • Customizing via text adjustments and user levels
  • Recording and overview of all process variables
  • Universal inputs for all common sensors and signals
  • Multiple parameter sets, setpoint switching, ramp function
  • Common interfaces (PROFINET, ETHERNET, Modbus, etc.)

Purchase PID controller

The most important background information

Are you looking for a complete solution?

JUMO Engineering

Customized and from a single source

We not only offer PID controllers, but also complete individual solutions. This includes feasibility analyses, workshops, preparation of product requirement specifications and specification sheets, and the implementation of automation solutions.
Contact us!

We are at your service

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.
Contact us